Utah knife works survivor Tom brown tracker review

Overview

When heading on your following adventurous activities, the TOPS Tom Brown Tracker could be a helpful device. This blade is created to cut and saw its way into everything with a dark lubrication-covered 1095 Carbon Steel blade and a black linen Micarta handle. The huge tang knife cuts across tree body parts with convenience and can also be used to make spark for a fire. It arrives with a dark-shaped Kydex sheath with two multi-position stainless steel frames that can be fitted on a belt or carried in a bag.

Utah knife works survivor Tom brown tracker review (description)

 The frame is slightly less than 12 inches lengthy and weighs precisely one pound. It’s well-balanced and easy to carry and operate. The full-tang design and high-quality steel make sure the knife’s sturdiness when executing complex tasks. The blade is approximately 6 inches long and 5 mm thick, with a shaped front section positioned for cutting and a finger resting on the edge of the knife to help handle stability. A recessed smooth surface on the bottom part of the blade allows for simple downward cutting. The knife’s back has rough multi saw teeth for cutting wood in snare construction or creating grooves for attaching rope between trees. Because it allows 2 locations of contact to its saw edge, it is a lovely spot to scratch a fire-starting rod. A razor-sharp efficiency hook also sits next to the saw edge, and it can be used as a gut hook for washing animals or to shave tree or curls of timber from stems to utilize as a tinder for setting fires. It can also be used to cut or straighten arrow-making sticks. Ultimately, the knife has a stainless steel rough surface on the blade end for beating stakes, smashing nuts and seeds, and every other hammering assignment. The checkered glass-reinforced-nylon grip has a finger cover and is created for incredible versatility and a durable handle.

Utah knife works survivor Tom brown tracker review (features)

Design

The first two-and-a-half inches of the flat blade slightly toward the front of the handle are a heavier smoothed grind and melted jimping on the six protected by a robust thump platform. The Survivor Knife’s straight blade can be used as a pull knife, a batoning confront, or a standard slicing knife. Batoning requires caution since users wouldn’t like to hit the saw teeth. Hence, take it slowly and hit right in front of the teeth, in which a tiny edge framework provides an open area, or hit behind the gut hook on a curving steel plain simply over the flat blade. The knife is more of a wedge-shaped finishing effectively right in line with the edge of the handle or perhaps a reach just above, considering the upcoming safety hook as one follows the blade angle up and about. The chopping areas on the Utah Knife Works Survivor Knife perform admirably. The straight blade is perfect for producing feather sticks. It also applies well as a batoning scenario to the end. Users could use the entire length of the knife to baton trees and section more extensive wood as it is a fraction of the total blade length.

Saw edge

The forceful cross-cut saw edge addresses the first 2 inches away from the end. The end is extraordinary at crafting notches, short-throw cutting, and creating more flames off a fire rod than users can picture, acting more like a sharpener than a saw. It’s doubtful that attempting to saw a branch with your teeth is a good idea. Because of the saw’s short throw, you’ll have to utilize it more as a Sheath

The new, two-snap dark leather sheath has a belt frame layout. The Survivor from Utah Knife Works has a distinctive structure that necessitates an unusual sheath structure. It performs admirably. Sewing a firesteel loop onto the sheath even in the coming future will be a classy bonus that would also compliment the blade’s “Survivor” beauty.

Pros

It comes with a sheath

It is durable

It can help with igniting a fire

FAQ

  1. Is the Utah knife works survivor Tom brown tracker is a good knife?

Yes, this knife is excellent.

Conclusion

The transformation from a rather inset plain knife to a distinctive angled knife structure with saw teeth of a particular piece covering the front edge is the most renowned shape of the knife structure. The design on this Survivor Knife is approximately a foot long, and it’s made of shiny stainless steel with dark crystal canoe-shaped polyester scales that are each fastened by three screws. The Survivor Knife from Utah Knife Works gets the job done. Once users grip this knife, the first point users observe how heavy it is. It weighs in at a pound and a half. The six-inch blade does not get any thinner until it reaches the half-inch head. Because the edge of the blade cuts with both the saw and hook, caution is required.

Leave a Comment